7084 Line Pressure Controller Module
- Description
- Reviews (0)
Description
The 7084 is a line pressure controller module used to provide adjustable regulated pressure for connection bench modules and external pressure devices. It is particularly suitable for use with the 7038 and 7065 pressure indicator modules. Incoming pneumatic line pressure is connected via the rear of the console, with output via the front panel port.
There are seven available versions, and the module is built according to the customer’s required range, either 5, 10, 20, 35, 70, 100, or 200bar. The external line pressure may be from a compressor or regulated gas bottle.
The 63mm front panel gauge displays the regulated line pressure. Direct output of the internal line pressure is also available on the front panel via quick release connection (on 5, 10, and 20bar versions) or minimess connection (on 35, 70, 100, and 200bar versions). The external line pressure can be isolated using a needle block valve on the front panel. Multiple 7084’s can be fitted to CalBench consoles, to provide a choice of output pressures simultaneously.
Thông số kỹ thuật
Available Versions | 5, 10, 20, 35, 70, 100, or 200bar |
Gauge | 63mm anti-shock analogue |
Regulator | Pneumatic self-relieving |
Maximum Line Pressure | Dependant on version ordered |
Fittings | Quick Release for 5, 10 & 20bar versions. Minimess for 35, 70, 100 & 200bar versions |
Rear Connections | Quick Release for 5, 10 & 20bar versions. Minimess for 35, 70, 100 & 200bar versions |
Front Panel Output Port | Same connection as line input port |
Valve | Swagelok needle isolation valve on line input port |
Module Width | 150mm (primary or secondary console fitting) |
Reviews
There are no reviews yet.