• Description
  • Reviews (0)

Description

Features
1. EPIC form factor with Intel® D2550/N2600 dual-core proccessor supporting DDR3/DDR3L (1.35V) memory
2. Wide range 9V ~ 28V DC input design
3. Flexible VGA, dual LVDS and HDMI with dual-display support
4. Supports PC/104-Plus and PCIe Mini card slot compatible with mSATA SSD storage
5. Complete I/O with six USB, two SATA 3Gb/s, four COM and audio
6. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Specifications Specifications
CPU Intel® dual core Atom™ D2550 1.86GHz processor
Intel® dual core Atom™ N2600 1.6GHz processor
Intel® dual core Atom™ N2800 1.86GHz processor (optional)
System Chipset Intel® NM10
BIOS UEFI BIOS
System Memory 1 x 1066MHz DDR3 SO-DIMM supporting up to 4GB (for D2550 and N2800)
1 x 800MHz DDR3 SO-DIMM supporting up to 2GB (for N2600)
Ethernet Dual LAN by Realtek RTL8111E controllers
I/O Interface 1 x 6-pin wafer for PS/2 KB/MS
1 x microSD (Only for boot up to DOS)
1 x RS-422/485
3 x RS-232
2 x USB 3.0
4 x USB 2.0
2 x SATA 3Gb/s with 5V power connector (SATA1 and mSATA shares SATA signal)
SMBus 1 x 4-pin wafer connector
Audio Realtek ALC662 HD audio codec
Display Interfaces Dual display supported
1 x VGA (up to 1920 x 1200 @60Hz) (Due to Intel GMA driver limitation, the monitor connected to the VGA connector may not have signal to it or become extended desktop after restarting from the graphics driver installation. To solve this problem, press the Ctrl+Alt+F1 hotkey to switch the primary screen to CRT mode.)
1 x HDMI (up to 1920 x 1200 @60Hz)
LVDS1 integrated in the D2550/N2600
Single-channel 24-bit LVDS by D2550, resolution support up to 1440×900 @60Hz
Single-channel 18-bit LVDS by N2600 and N2800, resolution support up to 1366×768 @60Hz
LVDS2 supports 24-bit dual-channel by CH7511
DP to LVDS converter, resolution support up to 1920×1200 for D2550, 1600×1200 for N2600/N2800
Expansion 1 x PCIe Mini card (compatible with mSATA SSD device) (SATA1 and mSATA shares SATA signal)
1 x PC/104 slot (ISA)
1 x PCI/104 slot (PCI)
Watchdog Timer Software programmable supports 1~255 sec. system reset
Power Supply Maximum input voltage range: 9V ~ 28V
Recommended operating input voltage range: 12V ~ 24V
One internal 4-pin (2×2) power connector
Power Consumption 12V@2.1A (Intel® D2550 1.86GHz CPU with 1333MHz 2GB DDR3 memory)
12V@1.72A (Intel® N2600 1.6GHz CPU with 1333MHz 2GB DDR3 memory)
Graphic GMA 3650 at 640MHz graphics core speed (for N2550 and N2800)
GMA 3600 at 400MHz graphics core speed (for N2600)
GPIO 8-bit GPIO
Operating Temperature -20°C ~ 60°C with free air, -20°C ~ 70°C with force air for D2550 processor
-20°C ~ 70°C with free air, -20°C ~ 75°C with force air for N2600/N2800 processor
Storage Temperature -30°C ~ 80°C
Humidity 5% ~ 95%, non-condensing
Weight GW: 670g/NW: 350g
Fan Connector 1 x 3-pin CPU fan connector
1 x 3-pin system fan connector
Ordering Information Ordering Information
Part No. Description
NANO-CV-D25501-R10 EPIC SBC with Intel® Atom™ D2550 1.86GHz, DDR3, VGA/ HDMI/dual LVDS, dual GbE, USB 3.0, mSATA, SATA 3Gb/s, Audio, RoHS
NANO-CV-N26001-R10 EPIC SBC with Intel® Atom™ N2600 1.6GHz, DDR3, VGA/HDMI/ dual LVDS, dual GbE, USB 3.0, mSATA, SATA 3Gb/s, Audio, RoHS
NANO-CV-N28001-R10 EPIC SBC with Intel® Atom™ N2800 1.86GHz, DDR3, VGA/ HDMI/dual LVDS, dual GbE, USB 3.0, mSATA, SATA 3Gb/s, Audio and RoHS (by project support, MOQ 100pcs / lot)
32200-000049-RS RS-232 cable
32205-003800-300-RS RS-422/485 cable, 200mm
19FFD124010HB2A7-000001-RS CPU fan
34000-000510-RS 30mm higher heatsink
Ordering Information Packing List
1 * NANO-CV-D25501/N26001 single board computer 1 * PS/2 KB/MS Y cable (P/N:32000-023800-RS)
1 * SATA with 5V output cable (P/N:32801000201-100-RS) 1 * Power cable (P/N:32100-087100-RS)
1 * Audio cable (P/N:32000-072100-RS) 1 * USB cable (P/N:32000-070301-RS)
1 * RS-232 cable (P/N:32200-000049-RS) 1 * One Key Recovery CD
1 * Mini jumper pack 1 * Utility CD
1 * QIG (Quick Installation Guide)

Reviews

There are no reviews yet.


Be the first to review “NANO-CV-D25501/N26001”