IDS-5042-WG/IWG
- Description
- Reviews (0)
Description
Specifications | ||
ORing Media Converter Model | IDS-5042-WG | IDS-5042-IWG |
Physical Ports | ||
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 | |
WLAN Feature | ||
Operating Mode | Client mode | |
Antenna and Connector | 2dBi antenna on reversed SMA connector | |
Radio Frequency Type | DSSS, OFDM | |
Modulation | IEEE802.11b : CCK, DQPSK, DBPSK IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM |
|
Frequency Band | America/FCC : 2.412~2.462 GHz (11 channels) Europe CE/ETSI : 2.412~2.472 GHz (13 channels) |
|
Transmission Rate | IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps |
|
Transmit Power | IEEE802.11b/g : 18dBm | |
Receiver Sensitivity | -81dBm @ 11Mbps, PER< 8%; -64dBm @ 54Mbps, PER< 10% |
|
Encryption Security | WEP : (64-bit ,128-bit key supported) WPA /WPA2 : IEEE802.11i(WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) TKIP encryption 802.1x Authentication supported |
|
Serial Ports | ||
Connector | DB9(male) x 4 | 5-pin terminal block x 4 |
Operation Mode | RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool | RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool |
Serial Baud Rate | 110 bps to 460.8 Kbps | |
Data Bits | 5, 6, 7, 8 | |
Parity | odd, even, none, mark, space | |
Stop Bits | 1, 1.5, 2 | |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND | – |
RS-422 | Tx+,Tx-, Rx+, Rx-,GND | |
RS-485 (4-wire) | Tx+,Tx-, Rx+, Rx-,GND | |
RS-485 (2-wire) | Data+, Data-,GND | |
RS-485 (2-wire) | Data+, Data-,GND | |
Isolation | – | 2 KV |
Flow Control | XON/XOFF, RTS/CTS, DTR/DSR | XON/XOFF |
Network Features | ||
Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS | |
LED Indicators | ||
Power Indicator | PWR 1(2) / Ready : Red On : Power is on and booting up Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly Green On : Power is on and functioning Normally Green Blinking : Located by Administrator |
|
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps. |
|
WLAN Indicator | WLAN Link /ACT : Green WLAN Strength : 1<25%, 2<50%, 3<75%, 4<100% |
|
Serial TX / RX LEDs | Red : Serial port is receiving data Green : Serial port is transmitting data |
|
Power | ||
Redundant Input Power | Dual 12~48VDC on 6-pin terminal block | |
Power Consumption (Typ.) | 6.5 watts | 6.5 watts |
Overload Current Protection | Present | |
Reverse Polarity Protection | Present | |
Physical Characteristics | ||
Enclosure | IP-30 | |
Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.) | |
Weight (g) | 691 g | 675 g |
Environmental | ||
Storage Temperature | -40 to 85°C (-40 to 185°F) | |
Operating Temperature | -10 to 70°C (14 to 158°F) | |
Operating Humidity | 5% to 95% Non-condensing | |
Regulatory Approvals | ||
EMI | FCC Part 15, CISPR (EN55022) class A, | |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-32 | |
Vibration | IEC60068-2-6 | |
Safety | EN60950-1 | |
Warranty | 3 years |
Reviews
There are no reviews yet.