IDS-5042-I+
- Description
- Reviews (0)
Description
ORing Media Converter Model | IDS-5042-I+ |
Physical Ports | |
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 |
PoE P.D. port | PoE Present at ETH2 Power Device (IEEE 802.3af) : IEEE 802.3af compliant input interface Over load and short circuit protection Isolation Voltage : 1000 VDC min. Isolation Resistance : 108 ohms min |
Serial Ports | |
Connector | 5-pin terminal block x 4 |
Operation Mode | RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool |
Serial Baud Rate | 110 bps to 460.8 Kbps |
Data Bits | 5, 6, 7, 8 |
Parity | odd, even, none, mark, space |
Stop Bits | 1, 1.5, 2 |
RS-422 | Tx+,Tx-, Rx+, Rx-,GND |
RS-485 (4-wire) | Tx+,Tx-, Rx+, Rx-,GND |
RS-485 (2-wire) | Data+, Data-,GND |
Isolating | 2KV |
Flow Control | XON/XOFF |
Network Features | |
Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS |
LED Indicators | |
Power Indicator | PWR 1(2) / Ready : Red On : Power is on and booting up. Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On : Power is on and functioning Normally. Green Blinking : Located by Administrator. |
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps. |
Serial TX / RX LEDs | Red : Serial port is receiving data Green : Serial port is transmitting data |
Fault Contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power | Triple DC Inputs,48VDC from PoE and Dual DC inputs. 12~48VDC on 6-pin terminal block |
Power Consumption (Typ.) | 5.5 watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.) |
Weight (g) | 667g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -10 to 70°C (14 to 158°F) |
Operating Humidity | 5% to 95% Non-condensin |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A, |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Warranty | 5 years |
Be the first to review “IDS-5042-I+” Cancel reply
Related Products
-
Thiết bị đo sức căng cáp KHÔNG TIẾP XÚC Model GM12-0C
0 out of 5 -
Electronic Components
0 out of 5 -
IGS-9084GP
0 out of 5 -
Shoes
0 out of 5Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum tortor quam, feugiat vitae, ultricies eget, tempor sit amet, ante. Donec eu libero sit amet quam egestas semper. Aenean ultricies mi vitae est. Mauris placerat eleifend leo.
-
Baseball
0 out of 5Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum tortor quam, feugiat vitae, ultricies eget, tempor sit amet, ante. Donec eu libero sit amet quam egestas semper. Aenean ultricies mi vitae est. Mauris placerat eleifend leo.
-
Thiết bị đo sức căng cáp KHÔNG TIẾP XÚC Model GMS12-0M
0 out of 5 -
Woo Logo
0 out of 5Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum tortor quam, feugiat vitae, ultricies eget, tempor sit amet, ante. Donec eu libero sit amet quam egestas semper. Aenean ultricies mi vitae est. Mauris placerat eleifend leo.
20,00₫Original price was: 20,00₫.18,00₫Current price is: 18,00₫. -
IGPS-9084GP
0 out of 5 -
Motors, Gearbox, brakes
0 out of 5 -
Measuring equiqments & Tool kit
0 out of 5
Reviews
There are no reviews yet.