IAP-120/120+
Category: Chưa phân loại
- Description
- Reviews (0)
Description
Specifications | ||
IAP-120 | IAP-120+ | |
Physical Ports | ||
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 | |
P.O.E. PD port | Present at ETH2 Fully compliant with IEEE 802.3af Power Device specifi cation Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min |
|
WLAN interface | ||
Operating Mode | AP/Bridge/Repeater/AP-Client | |
Antenna and connector | 2dBi antenna on reverse SMA connector | |
Radio Frequency Type | DSSS, OFDM | |
Modulation | IEEE802.11b : CCK, DQPSK, DBPSK IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM |
|
Frequency Band |
America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels) Japan TELEC : 2.412~2.472 GHz,2.484GHz (14 channels) |
|
Transmission Rate | IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps |
|
Transmit Power | IEEE802.11b/g : 20dBm Max | |
Receiver Sensitivity | -81dBm @ 11Mbps, PER< 8%; -64dBm @ 54Mbps, PER< 10% |
|
Encryption Security | WEP : (64-bit ,128-bit key supported) WPA : WPA2 : 802.11i(WEP and AES encryption) PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption |
|
Wireless Security | SSID broadcast disable | |
Protocol Support | ||
Protocol | ARP, BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D) | |
LED Indicators | ||
Power Indicator | PWR 1(2)(P.O.E.) / Ready : Red On : Power is on and booting up. Green On : Power is on and functioning Normally. |
|
10/100TX RJ45 Port Indicator | Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps | |
WLAN LEDs | WLAN Link /ACT : Green WLAN Strength : 1<25%, 2<50%, 3<75%, 4<100% |
|
Fault | Red : Ethernet link down or power down | |
Fault contact | ||
Relay | Relay output to carry capacity of 1A at 24VDC | |
Power | ||
Redundant Input Power | Dual DC inputs. 12-48VDC on 6-pin terminal block | Triple DC inputs, 48VDC from PoE and Dual 12~48VDC on 6-pin terminal block |
Power Consumption (Typ.) | 6 Watts | |
Overload Current Protection | Present | |
Reverse Polarity Protection | Present on terminal block | |
Physical Characteristic | ||
Enclosure | IP-30 | |
Dimension (W x D x H) | 54.2(W) x 106.1(D) x 145.4(H) mm (2.13×4.18×5.72 inch.) | |
Weight (g) | 800 g | 804 g |
Environmental | ||
Storage Temperature | -40 to 85°C (-40 to 185°F) | |
Operating Temperature | -10 to 60°C (14 to 140°F) | |
Operating Humidity | 5% to 95% Non-condensing | |
Regulatory approvals | ||
EMI | FCC Part 15, CISPR (EN55022) class A | |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11 | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-32 | |
Vibration | IEC60068-2-6 | |
Safety | EN60950-1 | |
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 352,982 | 352,594 |
Warranty | 3 years |
Be the first to review “IAP-120/120+” Cancel reply
Related Products
-
Shoes
0 out of 5Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum tortor quam, feugiat vitae, ultricies eget, tempor sit amet, ante. Donec eu libero sit amet quam egestas semper. Aenean ultricies mi vitae est. Mauris placerat eleifend leo.
-
IGPS-9084GP
0 out of 5 -
IES-3082GC
0 out of 5 -
RGS-PR9000 SERIES
0 out of 5 -
Sensors, transducers or transmitters
0 out of 5 -
Ladies Handbag
0 out of 5Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum tortor quam, feugiat vitae, ultricies eget, tempor sit amet, ante. Donec eu libero sit amet quam egestas semper. Aenean ultricies mi vitae est. Mauris placerat eleifend leo.
-
IGS-3032GC
0 out of 5 -
IES-P3073GC Series
0 out of 5 -
RES-P3242GCL Series
0 out of 5 -
Thiết bị đo sức căng cáp KHÔNG TIẾP XÚC Model GMS12-0M
0 out of 5
Reviews
There are no reviews yet.