7033 LCR Meter Module
- Description
- Reviews (0)
Description
The 7033 LCR Meter module has a basic measurement accuracy of 0.05%. It is most useful in application areas that need both high stability and high accuracy test criteria. Frequency coverage from 12 Hz to 100 KHz provides versatile parameter-to-frequency measurements to the device under test.
The variable test signal voltage from 5 mV to 1.275 V and the internal/external DC bias selection simulates the real operation condition of DUT. Features include a 240 x 128 high resolution LCD display to show both the test condition and the test result simultaneously, the keypads for menu programming, and the 100 sets of memory to store/recall setup state.
Features:
• Test Frequency: 12 Hz to 200 kHz
• Continuously Variable Fequencies
• 0.05% Accuracy
• 100 Sets Memory for Save/Recall of Setup State
• R/Q, C/D, C/R, L/Q, Z/θ, L/R Test Modes
• Absolute Value, Δ Value, & Δ% Measure display
• 240 x 128 dot Matrix LCD Display
• Test Condition and Test Result shown on the Screen Simultaneously
• RS-232C Interface
Thông số kỹ thuật
TEST FREQUENCY | 12Hz ~ 200kHz (504 steps) |
BASIC ACCURACY | 0.05% |
TEST SPEED | 5mV ~ 1.275Vrms ( 5mV/step ) |
DC BIAS | Internal: 2V / External: 0 ~ 35V |
DISPLAY RANGE | Resistance…………………………R 0.00001Ω ~ 99999kΩ Capacitance……………………….C 0.00001pF ~ 99999uF Inductance………………………….L 0.00001mH ~ 99999H Quality Factor……………………..Q 0.0001 ~ 9999 Dissipation Factor………………D 0.0001 ~ 9999 Impedance…………………………|Z| 0.00001Ω ~ 99999kΩ Phase Angle (Degree)……….θ -180.00° ~ 180.00° |
TEST MODE | Z/θ, L/R |
EQUIVALENT CIRCUIT | Parallel or series selectable |
MEMORY | 100 memory blocks total |
AVERAGE | 1 to 255 times |
TEST SPEED MODE | SLOW, MEDIUM and FAST |
DISPLAY MODE | Value, Δ, Δ% |
DISPLAY | 240 x 128 dot matrix C.C.F.L back light LCD |
INTERFACE | RS-232C on the rear of the CalBench Console |
MODULE WIDTH | 380mm (primary console fitting only) |
OPTIONAL EXTRAS | Test Leads – contact us for details |
Reviews
There are no reviews yet.