TTS-100 Torque Tester System
- Mô tả
- Đánh giá (0)
Mô tả
The TTS-100 is a torque calibration system that offers a solution for torque measurement applications. The torque tester unit provides an easy to use interface that connects to a dedicated torque transducer to perform the calibration of a wide range of torque tools. The system accuracy is ± 0.5% of reading from 10% to 100% of full scale. The tester unit has three operating modes that are Peak, Track and First Peak. It monitors torque and pulse count, and displays both the peak torque and the number of pulses performed during a preset time frame to reach the final torque value.
The accompanying torque transducers are bench mounted calibration instruments designed for the calibration of torque wrenches, torque screwdrivers, and electric & pneumatic screwdrivers. Transducers are available ranging from 1.5 cN.m (2 ozf.in) up to 27,000 N.m (20,000 lbf.ft). Each transducer is bi-directional with a female square drive, and connect to the tester via a port on the side of the unit. Bench mounts are available to provide a firm base for each transducer.
The TE torque calibration system is EasyCal software compatible with connection via USB on the tester unit. Automating the calibration process provides increased speed of calibration and consistency of results. Produce calibration certificates and reports to ISO 9001, ISO 17025, and other international quality standards.
Features:
• Calibrate torque wrenches, pulse tools, hand screwdrivers, and power tools
• Complete solution with torque transducers, mounts and calibration software available
• System Accuracy ± 0.5% of reading from 10% to 100% of full scale
• Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm)
• Selection of three operation modes: Peak, Track, First Peak
• Simple operation with easy to use menus and calibration prompts
• Auto filter frequency selection based upon tool type being used in Peak mode
• Large easy to read eight digit LCD display
• Compact, lightweight unit supplied with carry case
• USB interface and EasyCal calibration software compatible
Thông số kỹ thuật
| System Accuracy | ± 0.5% of reading from 10% to 100% of full scale |
| Operating Modes | Peak, Track, First Peak |
| Units of Measure | ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm |
| OCP Protection | Over Current Protection (OCP) protects unit from damage or malfunction |
| Display | Eight digit, two line LCD dot matrix display |
| Power | Mains or battery (NimH, charger supplied) |
| Battery | 8 hours typical operation. 4 hours typical recharge time. |
| Interfaces | 1 x Torque Transducer connection port, 1 x USB port |
| Dimensions | W 148mm x H 118mm x D 48.7mm / 5.8” x 4.63″ x 1.92″ |
| Weight | 0.88kg / 1.94 lbs |
| Environmental |
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Humidity: Maximum of 95% Relative Humidity
|
| Supplied with | Carry case, USB cable, rechargeable battery and universal charger |
| Options | Torque Transducers (see below)
Cable for TE-TRQ transducer to TTS-100 tester Mounts for Torque Transducer
|
| TE-TRQ-X20z | Torque Transducer – 1.5 to 14 cN.m (2 to 20 ozf.in), drive size 1/4 F/Sq |
| TE-TRQ-X40z | Torque Transducer – 2.9 to 28.2 cN.m (4 to 40 ozf.in), drive size 1/4 F/Sq |
| TE-TRQ-X80z | Torque Transducer – 5.7 to 56.5 cN.m (8 to 80 ozf.in), drive size 1/4 F/Sq |
| TE-TRQ-X10i | Torque Transducer – 11.3 to 113 cN.m (1 to 10 lbf.in), drive size 1/4 F/Sq |
| TE-TRQ-X25i. | Torque Transducer – 28.25 to 282.5 cN.m (2 to 25 lbf.in), drive size 1/4 F/Sq |
| TE-TRQ-X50i | Torque Transducer – 56.5 to 565 cN.m (5 to 50 lbf.in), drive size 1/4 F/Sq |
| TE-TRQ-X100i | Torque Transducer – 113 to 1130 cN.m (10 to 100 lbf.in), drive size 1/4 F/Sq |
| TE-TRQ-X250i | Torque Transducer – 282.5 to 2825 cN.m (25 to 250 lbf.in), drive size 1/4 F/Sq |
| TE-TRQ-X500i | Torque Transducer – 565 to 5650 cN.m (50 to 500 lbf.in), drive size 3/8 F/Sq |
| TE-TRQ-X750i | Torque Transducer – 847 to 8473 cN.m (75 to 750 lbf.in), drive size 3/8 F/Sq |
| TE-TRQ-X50F | Torque Transducer – 6.8 to 67.8 N.m (5 to 50 lbf.ft), drive size 3/8 F/Sq |
| TE-TRQ-X100F | Torque Transducer – 13.56 to 135.6 N.m (10 to 100 lbf.ft), drive size 1/2 F/Sq |
| TE-TRQ-X250F | Torque Transducer – 33.9 to 339 N.m (25 to 250 lbf.ft), drive size 1/2 F/Sq |
| TE-TRQ-X500F | Torque Transducer – 67.8 to 678 N.m (50 to 500 lbf.ft), drive size 3/4 F/Sq |
| TE-TRQ-X1000F | Torque Transducer – 135.6 to 1355 N.m (100 to 1000 lbf.ft), drive size 1 F/Sq |
| TE-TRQ-X2500F | Torque Transducer – 339 to 3389 N.m (250 to 2500 lbf.ft), drive size 1 1/2 F/Sq |
| TE-TRQ-X5000F | Torque Transducer – 678 to 6779 N.m (500 to 5000 lbf.ft), drive size 1 1/2 F/Sq |
| TE-TRQ-X10000F | Torque Transducer – 1335 to 13558 N.m (1000 to 10000 lbf.ft), drive size 2 1/2 F/Sq |
| TE-TRQ-X20000F | Torque Transducer – 2711 to 27116 N.m (2000 to 20000 lbf.ft), drive size 2 1/2 F/Sq |
Transducer Specifications:
Rated Output: 2mv/v Nominal
Safe Overload: 125% of Rated Output
Bridge Resistance: 350 Ohms Nominal
Non linearity: 0.1% of Rated Output
| TE-TRQ-CBL | Cable for TE-TRQ transducer to TTS-100 |
| TE-TRQ-MB-1 | Mount for Torque Transducer: For use with TE-TRQX20z – TE-TRQX500F |
| TE-TRQ-MB-3 | Mount for Torque Transducer: For use with TE-TRQX1000F – TE-TRQX5000F |
Đánh giá
Chưa có đánh giá nào.