• Mô tả
  • Đánh giá (0)

Mô tả

Features
1. LGA1150 Intel® Xeon® E3/Core™ i3/Pentium®/Celeron® processor supported
2. Dual-channel DDR3 1600/1333MHz support up to 32GB
3. Intel® PCIe GbE with Intel® AMT 9.0 support
4. Support PCI Express generation 3.0 at 8GT/s I/O bandwidth
5. USB 3.0, SATA 6Gb/s and mSATA supported
6. High-speed interface for one PCIe x8 or two PCIe x4 add-on cards
7. IEI jumper-less function
8. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
9. Support IPMI 2.0 via iRIS-2400 module
Specifications Specifications
CPU LGA1150 Intel® Xeon® E3, Core™ i3, Pentium® or Celeron® processor supported
System Chipset Intel® C226
BIOS UEFI BIOS
System Memory Four 240-pin 1600/1333MHz dual-channel DDR3 & DDR3L SDRAM ECC and non-ECC unbuffered DIMMs support up to 32GB
Ethernet LAN1: Intel® I217LM with Intel® AMT 9.0 support
LAN2: Intel® I210-AT PCIe controller with NCSI support
I/O Interface 5 x RS-232
1 x RS-422/485
1 x LPT
1 x mSATA (colay SATA port 6) (support SATA 6Gb/s signal only)
1 x 6-pin wafer for PS/2 KB/MS
4 x USB 3.0 (rear IO)
8 x USB 2.0 (4 x rear IO, 4 by pin header)
6 x SATA 6Gb/s (RAID 0, 1, 5, 10 supported)
Digital I/O 8-bit Digital I/O (4-bit input, 4-bit output)
Super I/O Fintek F81866
TPM 1 x TPM connector (2×10 pin)
SMBus 1 x 4 pin wafer
Audio Realtek ALC662 HD Audio codec (Line-in, Line-out, Mic)
Display Interfaces VGA (up to 1920×1200 @ 60 Hz)
iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840×2160 @60 Hz)
Expansion 1 x PCIe x16 slot
2 x PCIe x4 slot
Default setting: 1 x PCIe x8 Gen 3 + 2 x PCIe x4 Gen 3 signal
Optional setting: 1 x PCIe x16 Gen 3 by BIOS setting
2 x PCIe x1 slot
2 x PCI slot
Watchdog Timer Software programmable support 1~255 sec. system reset
Power Supply ATX Power Supply
Power Consumption 3.3V@0.57A, 5V@4.50A, 12V@0.14A, Vcore_12V@5.20A, 5VSB@0.19A (Intel® E3-1240 v3 3.4GHz CPU with 16GB (4x4GB) 1333MHz DDR3 memory)
Graphic Intel® HD Graphics Gen 7.5 supports DX11.1 and OpenCL 1.2, OpenGL 3.2 Full MPEG2, VC1, AVC Decode
Operating Temperature -20°C ~ 60°C
Storage Temperature -30°C ~ 70°C
Humidity 5% ~ 95%, non-condensing
Dimensions 244mm x 305mm
Weight GW:1200g, NW: 700g
Front Panel 1 x Front panel (Power LED, HDD LED, Speaker, Power Button, Reset Button)
I2C 1 x 4 pin wafer
Front Audio 2 x 5-pin header
Fan Connector 1 x 4-pin CPU fan connector
2 x 3-pin system fan connector
iRIS Remote Management Module 1 x iRIS-2400 slot
LAN LED 2 x 2-pin headers for LAN1 Link LED, LAN2 Link LED
Ordering Information Ordering Information
Part No. Description
IMBA-C2260-i2-R10 ATX motherboard supports 22nm LGA1150 Intel® Xeon E3, Core™ i3, Pentium® and Celeron® per Intel® C226, DDR3, VGA, Dual Intel® PCIe GbE, four USB 3.0, six SATA 6Gb/s, HD Audio, iRIS-2400 and RoHS
iRIS-2400-R10 IPMI 2.0 adapter card with AST2400 BMC chip for DDR3 SODIMM socket interface
19800-003100-300-RS Dual-port USB cable with bracket
19800-010500-200-RS USB 3.0 cable 457mm with bracket
32205-003800-300-RS RS-422/485 cable, 200mm
32205-001203-200-RS RS-232 cable, 40-pin to four DB-9
32102-000100-200-RS SATA power cable, MOLEX 5264-4P to SATA15P
19800-000075-RS PS/2 KB/MS Y-cable with bracket, 220mm
19800-000049-RS LPT cable
CF-1156A-RS-R11 High performance LGA1155/LGA1156 cooler kit, 1U chassis compatible, 73W
CF-1156E-R11 High performance LGA1155/LGA1156 cooler kit, 95W
DP-LVDS-R10 DisplayPort to 24-bit dual-channel LVDS converter board (for IEI iDP connector)
DP-HDMI-R10 DisplayPort to HDMI converter board (for IEI iDP connector)
DP-DVI-R10 DisplayPort to DVI-D converter board (for IEI iDP connector)
DP-VGA-R10 DisplayPort to VGA converter board (for IEI iDP connector)
DP-DP-R10 DisplayPort to DisplayPort converter board (for IEI iDP connector)
TPM-IN01-R11 20-pin Infineon TPM module, software management tool, firmware V3.17
Ordering Information Packing List
1 * IMBA-C2260-i2 Single Board Computer 1 * SATA Cable (P/N:32000-062800-RS)
1 * I/O Shielding (P/N:45014-0045C0-00-RS) 1 * Utility CD
1 * QIG

Đánh giá

Chưa có đánh giá nào.


Hãy là người đầu tiên nhận xét “IMBA-C2260-i2”