| Features |
|
• 100W (8.3A @ 12V) output
• 28Wh or 56Wh, for more than 140 minutes operation time (dependent on panel PC power requirements)
• Rugged metal enclosure for standard VESA 75/100 mounting
• Web-based, remote network management, no software installation required
• Local PC-based monitoring software for input detection and battery status monitoring
• Auto shut down when battery low
• Remote DC output ON/OFF switch for external switch installation
• Provides stable power to the PC during line sags and spikes and absorbs power surges and transients,protecting expensive equipment |
|
|
 Specifications |
|
| Input |
| Ethernet interface |
Web-based, specification 10/100Mbps with RJ-45 connection, Cat. 5 cable |
| USB interface |
PC-capable, specification 2.0 with full speed, i.e. 2 Mbit/s. Standard 4-core shielded cable, USB Series “mini B”connector to DC-UPS |
|
| Output |
| Output voltage for normal operation |
DC +12V +/-5% |
| Output voltage for battery operation, approx. |
12~16.8V DC 12V (exhaustive discharge protection) |
| output current |
0A~8.3A |
| Efficiency(nominal operation)/power lossat Vin=12V, Iout=80% of full loading |
95% |
|
| Protection |
| short-circuit protection |
Yes |
| Exhaustive discharge protection |
1.Battery low is 10% of Battery capacity
2.Shuntdown 5% of Battery capacity (Default)
3.The end of Battery discharge voltage is 6V |
| EMC / Safety certification |
CE, FCC |
|
| Weight |
1.8kg |
| Storage Temperature |
-20°C~50°C |
| Operation Temperature |
0°C~40°C |
| Dimensions |
174mm(L) * 147mm(W)*35mm(H) |
| LED Indicator |
Green – DC power input
Yellow – Battery charging
Orange – Bettery discharging |
| Monitoring |
| Ethernet interface |
Web-based, specification 10/100Mbps with RJ-45 connection, Cat. 5 cable |
| USB interface |
PC-capable, specification 2.0 with full speed, i.e. 2 Mbit/s. Standard 4-core shielded cable, USB Series “mini B”connector to DC-UPS |
|
| Battery |
| Battery Model Name |
BAT-LI-2S2P3800 |
| battery type |
Li-Ion 2S2P 7.4V |
| Battery capacity |
8.4V |
| The end of discharging voltage |
5.6V |
| Suggestive charging current (Max.) |
2A |
| System continuous discharging current(Max) |
7.6A |
| The end of charge condition |
250mA/1Min |
| Discharge protection |
Under Voltage Protection / Over Current Protection |
| Charge protection |
Over Voltage Protection / Over Current Protection |
| Ambient temp |
0°C~40°C |
| Storage Tem |
-20°C~60°C |
| Self-discharge rate |
340uA~440uA |
| Dimensions |
139mm(L) * 47mm(W)*26mm(H) |
| Weight |
236g |
| Cycle life |
300 charge/discharge cycles |
| Backup |
60W/10Min |
| Safety class |
CE, FCC |
|
|
|
|
 Ordering Information |
|
| Part No. |
Description |
| AUPS-B10-R11 |
VESA 100, DC 12V input, 12V output 100W UPS module with 3800mAH, 2S4P Li-ion battery |
| BAT-LI-4S2P3800 (AUPS-B10/B20/C20) |
Smart battery; TE9IC042K1002; Lithium ion battery (4S2P); 14.8V; 3800mAh; RoHS |
|
|
|
 Packing List |
|
| 1 * DC power cable,150mm. mini Din 4 pin male to DC plug 5.0×2.1 |
1 * DC power cable,150mm. mini Din 4 pin male to DC plug 5.0×2.1(P/N:32000-115400-RS) |
| 1 * DC power cable, 150mm, DC plug 5.5×2.1 to DC plug 5.0×2.5 with lock (P/N:32000-115300-RS) |
1 * Remote switch cable, 1200mm (P/N:32000-115600-RS) |
| 1 * DC power cable, 150mm, DC plug 5.5×2.1 to DC plug 5.0×2.5 without lock (P/N: 32000-120400-RS) |
1 * Utility CD (including utility software and user’s guide, P/N: 7B000-000087-RS) |
| 1 * USB cable, 200mm, USB type A male to mini USB (P/N: 32000-115500-RS) |
1 * Screws kit (P/N:44013-030041-RS) |
|
|
|
VI
Đánh giá
Chưa có đánh giá nào.