IDS-5042-I+
- Description
- Reviews (0)
Description
| ORing Media Converter Model | IDS-5042-I+ |
| Physical Ports | |
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 |
| PoE P.D. port | PoE Present at ETH2 Power Device (IEEE 802.3af) : IEEE 802.3af compliant input interface Over load and short circuit protection Isolation Voltage : 1000 VDC min. Isolation Resistance : 108 ohms min |
| Serial Ports | |
| Connector | 5-pin terminal block x 4 |
| Operation Mode | RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool |
| Serial Baud Rate | 110 bps to 460.8 Kbps |
| Data Bits | 5, 6, 7, 8 |
| Parity | odd, even, none, mark, space |
| Stop Bits | 1, 1.5, 2 |
| RS-422 | Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (4-wire) | Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (2-wire) | Data+, Data-,GND |
| Isolating | 2KV |
| Flow Control | XON/XOFF |
| Network Features | |
| Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS |
| LED Indicators | |
| Power Indicator | PWR 1(2) / Ready : Red On : Power is on and booting up. Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On : Power is on and functioning Normally. Green Blinking : Located by Administrator. |
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps. |
| Serial TX / RX LEDs | Red : Serial port is receiving data Green : Serial port is transmitting data |
| Fault Contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Redundant Input Power | Triple DC Inputs,48VDC from PoE and Dual DC inputs. 12~48VDC on 6-pin terminal block |
| Power Consumption (Typ.) | 5.5 watts |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.) |
| Weight (g) | 667g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -10 to 70°C (14 to 158°F) |
| Operating Humidity | 5% to 95% Non-condensin |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A, |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Warranty | 5 years |
Reviews
There are no reviews yet.