• Mô tả
  • Đánh giá (0)

Mô tả

Specifications
ORing Switch Model

IGPS-9842GTP

IGPS-9842GTP-24V

Physical Ports
10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX 8 (P.S.E. with IEEE 802.3at)
10/100/1000Base-T(X) in RJ45 Auto MDI/MDIX 100/1000Base-X with SFP port 4
100/1000Base-X with SFP port 2
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switch Properties Switching latency: 7us
Switching bandwidth: 28Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Security Features Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network Redundancy O-Ring
Open-Ring
O-Chain
STP
RSTP
MSTP
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable.  115200bps, 8,N,1 (support backup unit)
LED Indicators
Power Indicator (PWR) Green : Power LED x 3
PoE Indicator Green : PoE LED x 8
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault) Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) P.S.E. RJ45 Port Indicator (P1 ~ P8) Dual color LED : Green for 1000Mbps Link/Act indicator.  Amber for 10/100Mbps Link/Act indicator
10/100/1000Base-T(X) RJ45 Port Indicator (P9 ~ P12) Green LED for Link/Act indicator.
Dual color LED for speed indicator ~ Green(1000Mbps)/Amber(100Mbps)/Off-light(10Mbps)
100/1000Base-X SFP Port Indicator Green for port Link/Act
Fault Relay
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 50 ~ 57VDC on 6-pin terminal block Dual DC inputs. 12~57VDC on 6-pin terminal block
PoE Output Power 50 ~ 57VDC : total power budget is 240Watts with maximum 30Watts per port 12 ~ 24VDC : total power budget is 60Watts with maximum 30Watts per port.
24 ~ 57VDC : total power budget is 120Watts with maximum 30Watts per port
Power Consumption (Typ.) 13.2 Watts (PoE loading is not included)
Overload Current Protection Present
Reverse Polarity Protection NOT Present
Physical Characteristic
Enclosure IP-30
Dimension 74.3 (W) x 109.2 (D) x 153.6 (H)mm (2.93 x 4.3 x 6.05 inch)
Weight 1270 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Đánh giá

Chưa có đánh giá nào.


Hãy là người đầu tiên nhận xét “IGPS-9842GTP Series”