• Mô tả
  • Đánh giá (0)

Mô tả

Specifications
ORing Media Converter Model IDS-5042-WG IDS-5042-IWG
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
WLAN Feature
Operating Mode Client mode
Antenna and Connector 2dBi antenna on reversed SMA connector
Radio Frequency Type DSSS, OFDM
Modulation IEEE802.11b : CCK, DQPSK, DBPSK
IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels)
Transmission Rate IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Transmit Power IEEE802.11b/g : 18dBm
Receiver Sensitivity -81dBm @ 11Mbps, PER< 8%;
-64dBm @ 54Mbps, PER< 10%
Encryption Security WEP : (64-bit ,128-bit key supported)
WPA /WPA2 : IEEE802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
TKIP encryption 802.1x Authentication supported
Serial Ports
Connector DB9(male) x 4 5-pin terminal block x 4
Operation Mode RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
RS-485 (2-wire) Data+, Data-,GND
Isolation 2 KV
Flow Control XON/XOFF, RTS/CTS, DTR/DSR XON/XOFF
Network Features
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready :
Red On : Power is on and booting up
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly
Green On : Power is on and functioning Normally
Green Blinking : Located by Administrator
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps.
Amber for port Link/Act at 10Mbps.
WLAN Indicator WLAN Link /ACT : Green
WLAN Strength : 1<25%, 2<50%, 3<75%, 4<100%
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data
Power
Redundant Input Power Dual 12~48VDC on 6-pin terminal block
Power Consumption (Typ.) 6.5 watts 6.5 watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.)
Weight (g) 691 g 675 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 70°C (14 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 3 years

Đánh giá

Chưa có đánh giá nào.


Hãy là người đầu tiên nhận xét “IDS-5042-WG/IWG”