IDS-5042 / 5042+

IDS-5042-I+
IDS-5012
1

IDS-5042 / 5042+

Chưa có đánh giá nào.

Add to Wishlist
Danh mục:
  • Mô tả
  • Đánh giá (0)

Mô tả

Specifications
ORing Media Converter Model IDS-5042 IDS-5042+
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2 2
PoE Feature – PoE P.D. Present at ETH2 Power Device (IEEE 802.3af):
IEEE 802.3af compliant input interface
Power consumption: 8Watts max.
Over load and short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min
Serial Ports
Connector DB9(male) x 4
Operation Mode RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Features
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready :
Red On : Power is on and booting up
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly
Green On : Power is on and functioning Normally
Green Blinking : Located by Administrator
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps.
Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data
Fault Indicator Red : Indicate unexpected events occurred
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual 12~48VDC on 6-pin terminal block Triple DC inputs, 48VDC from PoE and Dual 12~48VDC on 6-pin terminal block
Power Consumption (Typ.) 5.5 watts 5.5 watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.)
Weight (g) 678 g 682 g
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.)
Weight (g) 678 g 682 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 70°C (14 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 569,972
Warranty 5 years

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “IDS-5042 / 5042+”

Related Products