5069 – Insulation Tester Calibrator

5069 – Insulation Tester Calibrator

Danh mục:
  • Mô tả
  • Đánh giá (0)

Mô tả

Mô tả

A precision instrument suitable for calibrating and testing general purpose insulation testers and megohmmeters with test voltages up to 10kV.

It is constructed in a high strength co-polymer plastic case and is powered by a rechargeable battery. This ensures full isolation from the mains and prevents stray leakage.

The insulation tester being calibrated can be tested for open circuit voltage and short circuit current. These are displayed on the digital meter mounted on the front panel. The insulation resistance is provided by a precision 4 dial decade resistance bank which can be set to a maximum of 99.99GΩ with additional resistance values of 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ and 5MΩ which can be switched in as required.

Rugged and portable, the 5069 is ideal for site calibration work. Also available is the 5068 InsCal Insulation Test Calibrator, 2.5kV version.

Thông số kỹ thuật

Resistance10GΩ, 1GΩ, 100MΩ, 10MΩ decade ranges.
Fixed Values5MΩ, 2MΩ, 1MΩ, 500KΩ, 200KΩ, 100KΩ.
Resistance Accuracy100kΩ to 5MΩ = 1%. 10MΩ to 10GΩ = 1%. 10GΩ to 100GΩ = 5%.
Resistance Temperature CoefficientLess than 250ppm per °C
Open Circuit Voltage Measure0 to 2kV range, accuracy 1% of f/s. 0 to 10kV range, accuracy 2% of f/s.
Voltage Display1.999kV full scale, and 10kV full scale.
Short Circuit Current Measure0 to 2mA range and 0 to 20mA range = 1% of f/s accuracy.
Current Display1.999mA full scale, and 19.99mA full scale.

PowerInternal battery, 6V re-chargeable NiCad, >150hrs between charges.
DimensionsW406 x H175 x D330mm
Supplied WithSafety connection leads with bare end to allow custom probes (10kV rated), 4mm 5kV test lead set, wallet to carry test leads, and mains charger.
Optional ExtrasCalibration certificates traceable NPL and UKAS
Country of OriginUK

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “5069 – Insulation Tester Calibrator”