IMC-P111FX / IMC-P111P M12 Series

ISC-1210U-I
IMC-P111FX
1

IMC-P111FX / IMC-P111P M12 Series

There are no reviews yet.

Add to Wishlist
Category:
  • Description
  • Reviews (0)

Description

Specifications
ORing Media Converter Model

IMC-P111FX-MM-SC-M12

 IMC-P111FX-SS-SC-M12

IMC-P111P-M12
Physical Ports  
10/100 Base-T(X) Port in RJ45
Auto MDI/MDIX		 1 (M12 A-coded) 1 (M12 A-coded) 1 (M12 A-coded)
Fiber Ports Number 1 1 –
Fiber Ports Standard 100Base-FX 100Base-FX –
Fiber Mode Multi-mode Single-mode –
Fiber Diameter (µm) 62.5/125 µm
50/125 µm		 9/125 µm –
Fiber Optical Connector SC SC –
Typical Distance (Km) 2 Km 30 Km –
Wavelength (nm) 1310 nm 1310 nm –
Max. Output Optical Power (dbm) -14 dbm -8 dbm –
Min. Output Optical Power (dbm) -23.5 dbm -15 dbm –
Max. Input Optical Power (Saturation) 0 dbm 0 dbm –
Min. Input Optical Power (Sensitivity) -31 dbm -34 dbm –
Link Budget (db) 7.5 db 19 db –
100Base-FX SFP Port – – 1
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X) and 100Base-FX
IEEE 802.3x for Flow control
Processing Store-and-Forward
DIP-Switch setting DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
Alarm DIP-Switch
DIP-Switch 1 Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2 Power-2 failed warning : (ON) enable, (OFF) disable
LED Indicators
Power indicator LV Model : Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line
HV Model : Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator Green for fiber port Link/Act – (ON) Link up / (Flash) Acting / (OFF) Link down
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Fault Indicator Amber : Indicate unexpected event occurred
Duplex indicator Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
Power
LV Model Input Power Triple DC inputs. 12~48VDC on 7-pin terminal block. 12~45VDC on power jack
HV Model Input Power Dual 100~240VAC power inputs on 8-pin terminal block
Power consumption (Typ.) LV model : 12 Watts, HV model : 100VAC/4.8Watts,  240VAC/5.8Watts) LV model : 12 Watts
HV model : 100VAC/4.8Watts,  240VAC/5.8Watts)		 LV model : 12 Watts
HV model : 100VAC/4.8Watts,  240VAC/5.8Watts)
Overload current protection Present
Reverse polarity protection Present on terminal block
Physical Characteristics
Enclosure IP-30
Dimension (W x D x H) 54.2(W) x 106.1(D) x 145.4(H) mm (2.05×4.18×5.68 inch.)
Weight (g) LV model :  691 g
HV model :  833 g		 LV model : 681 g
HV model : 823 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 85°C (-40 to 185°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
Power Automation IEC 61850-3, IEEE 1613
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN50121-4
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Reviews

There are no reviews yet.

Be the first to review “IMC-P111FX / IMC-P111P M12 Series”

Related Products